Are you looking for special spare parts for the engine bay and drivetrain – suitable for VW T4? Then you've come to the right place. Discover selected spare and repair parts for maintenance, repair and servicing.
ABS + Pad Sensor, Connector Bracket, Clip Non-original parts – suitable for VW T4
It is a holder for the ABS cable Non-original parts – suitable for VW T4 . If the holder is damaged or missing, the routing of the ABS cable may be impaired. This component serves as a replacement part for repair and maintenance work and is suitable for VW T4.
Double Clamp 23 mm and 7 mm v4 Non-original parts – suitable for VW T4
This product is a double clamp with 23 mm and 7 mm diameters, Non-original parts – suitable for VW T4 . The double clamp is rotatable through 360° and is used to secure a Bowden cable to a hose or to connect one hose to another. In practice, the double clamp is often used as a holder for the throttle Bowden cable and is mounted on the outlet hose of the coolant expansion tank. The rotatable design supports flexible alignment and tidy cable routing in the engine compartment.
Gearbox Repair Kit Non-original parts – suitable for VW T4
This product is a repair kit for the manual transmission, Non-original parts – suitable for VW T4 . Problems when engaging gears can occur in older vehicles and may be attributable to worn or damaged components in the gear linkage area. This repair kit serves as a replacement solution to repair the relevant components. The kit is intended for use in repair and maintenance work. Installation is possible with basic mechanical skills. However, actual function and effectiveness may vary depending on the condition of the vehicle. If you have any questions about the product or its application, please feel free to contact us. Reference number: 701 798 169
Headlight washer system nozzle set Non-original parts – suitable for VW T4
This product consists of nozzles for the headlight washer system, Non-original parts – suitable for VW T4 . Over time, the nozzles may be lost or damaged. This set serves as a replacement solution to fully re-equip the headlight washer system. The nozzles are designed to match the intended installation positions and are intended for use in repair and maintenance work. Reference numbers (for comparison only): 701 955 101 (left) 701 955 102 (right) Design note: The nozzles are supplied without an overpressure valve. If the washer fluid reservoir is filled to the brim, washer fluid may escape through the nozzles in individual cases. An optional version with a retrofit overpressure valve is available, which can help reduce unintended water leakage. The valve is supplied with two hose connectors and is installed in the line behind the washer fluid reservoir. This can limit the outflow of washer fluid. The nozzles may extend slightly less, but the headlight cleaning function generally remains intact. If you have any questions about the product or its application, please feel free to contact us.
Headlight Washer System Valve Non-original parts – suitable for VW T4
This item is a valve for the headlight washer system, Non-original parts – suitable for VW T4 . The valve is installed between the washer fluid reservoir and the washer nozzles. It is used to regulate the pressure within the system and can help reduce unintentional leakage of washer fluid through the nozzles. The valve is suitable as a replacement if uneven pressure or leakage of washer fluid occurs in the existing system. If you have any questions about the product or require assistance with installation, please feel free to contact us.
Intake Pipe / Turbocharger Inlet 2.5 TDI Non-original parts – suitable for VW T4
This product is an intake pipe, Non-original parts – suitable for VW T4 . Over time, the old intake pipe may show material fatigue, particularly in the area of the turbocharger connection. This can lead to leaks, which may affect the airflow within the intake system. This intake pipe serves as a replacement part if the existing pipe is damaged or leaking. The component is manufactured to fit precisely and is intended for use in repair and maintenance work. Note: The O-ring for the turbocharger connection is included in the scope of delivery. Please check your vehicle’s reference number before ordering. Reference number: 074129715F If you have any questions about the product or its application, please feel free to contact us.
Intercooler & Air Filter Housing Bracket Non-original parts – suitable for VW T4
This product is a 4-piece holder set, Non-original parts – suitable for VW T4 . Over the years, original holders can become damaged or break due to aging or material fatigue. This set serves as a replacement solution to repair or replace the corresponding holders. The parts are manufactured to fit precisely and are intended for use in repair and maintenance work. Installation is possible with basic mechanical skills. Actual fit and function may vary depending on the condition of the vehicle. Reference number: 037133567F If you have any questions about the product or its application, please feel free to contact us.
Mounting Clip for Throttle or Clutch Cable Non-original parts – suitable for VW T4
This product is a clip for the throttle or clutch Bowden cable, Non-original parts – suitable for VW T4 . The clip is used for orderly routing of the Bowden cable on the plastic partition in the engine compartment. If the clip is damaged or missing, the routing of the Bowden cable may be impaired. In addition, the clip is also suitable for securing cables or vacuum hoses and supports tidy line routing in the engine compartment.
Plastic insert/stop buffer for the swing arm – not an original part – suitable for the VW T4
Plastic insert/stop buffer for the swing arm – not an original part – suitable for the VW T4 Syncro. May help to relieve stress on the swing arm bearing during operation. Suitable for gearbox codes: EEZ, DQR, 02G-Syncro Equivalent part numbers: 7D0 399 207E, 7D0 323 609
Sealing ring for intake pipe 2.5 TDI ACV – not an original part – suitable for VW T4 with the intake pipe from our shop
Sealing ring for intake pipe 2.5 TDI ACV – not an original part – suitable for VW T4 with the intake pipe from our shop. This seal is fitted between the intake pipe and the turbocharger.
Syncro ventilation grille bumper after GP Non-original parts – suitable for VW T4
This component is a Syncro grille, Non-original parts – suitable for VW T4 The grille is designed for installation in the designated opening and serves to guide airflow in the area of the Syncro transmission. The design is based on the intended ventilation requirements of the access panel. The edge of the grille is reinforced. In addition, four holes with a diameter of 4.5 mm are provided to ensure secure mounting. Comparison number (for comparison only): 701 807 238
Syncro ventilation grille bumper in front of GP Non-original parts – suitable for VW T4
This component is a Syncro grille, Non-original parts – suitable for VW T4 . The grille is designed for installation in the designated opening and serves to guide airflow in the area of the Syncro transmission. The design is based on the intended ventilation requirements of the access panel. The edge of the grille is reinforced. In addition, four holes with a diameter of 4.5 mm are provided to ensure secure mounting. Comparison number (for comparison only): 701 807 238
Valve Cover Bolt - Non-original parts – suitable for A6 C4 2.5 TDI
This item is a valve cover bolt seal Non-original parts – suitable for Audi A6 C4 2.5 TDI. Leaks at the valve cover bolt occur more frequently, especially in older engines, and can lead to oil loss. This seal serves as a suitable replacement if the original seal has become brittle or leaky. The seal is manufactured to fit precisely and is made from oil- and temperature-resistant material. Replacement is possible with basic mechanical skills and can often be carried out within a short time. According to feedback from practical use, replacing a defective seal can help reduce oil loss. However, the actual effect may vary depending on the vehicle condition and installation situation. If you have any questions about the product or its application, please feel free to contact us. Reference number: 046103533D
valve cover gasket for screw connection in a set of 8 pieces Non-original parts – suitable for VW T4
This item is a valve cover bolt seal, Non-original parts – suitable for VW T4 . Leaks in the area of the valve cover bolt can occur especially in older engines and may be associated with oil loss. This seal serves as a replacement part if the existing seal has become brittle or damaged. The seal is designed for its intended application and is manufactured from oil- and temperature-resistant material. Replacement is possible with basic mechanical skills. According to feedback from practical use, replacing a defective seal can help reduce oil loss. However, the actual effect may vary depending on vehicle condition and installation situation. Compatible with engine codes: ACV, AHY, AXG, AXL, AJT, AYC, AUF, AYY Part numbers (for comparison only): 074 103 469 P / 074 103 469 F