Replacement Parts Non-original parts – suitable for VW T4
VW is a protected trademark of Volkswagen AG. The mention serves exclusively to identify the vehicle allocation.
Discover our replacement parts suitable for VW T4. Browse our product range and find suitable replacement parts for your T4.
All parts are carefully reverse-engineered and designed to provide very good fitment and high quality.
With our high-quality replacement parts compatible with the Car, you can contribute to the proper repair and maintenance of your vehicle and enjoy it for many years to come.
ABS + Pad Sensor, Connector Bracket, Clip Non-original parts – suitable for VW T4
It is a holder for the ABS cable Non-original parts – suitable for VW T4 . If the holder is damaged or missing, the routing of the ABS cable may be impaired. This component serves as a replacement part for repair and maintenance work and is intended for vehicles compatible with VW T4.
Acoustic capsule for VW T4 gear linkage Non-original parts – suitable for VW T4
This component is an acoustic capsule, Non-original parts – suitable for VW T4 . The design is intended for use in the area of the gear linkage. The capsule forms a stable outer shell. The interior can optionally be lined with suitable sound insulation materials to further support noise reduction (insulation material not included). The additional cover can help reduce the transmission of noise from the area of the engine tunnel. It may also help reduce heat transfer into the interior. Scope of delivery: • 1 × foam rubber strip, approx. 650 mm, for sealing the contact surfaces Reference part number (for comparison only): 7D0 711 545 / 7D0711545
Anschlag für Pendelstütze kein Originalteil - passend für VW T4 Syncro
Kunststoffeinlage/Anschlagpuffer für die Pendelstütze des VW T4 Syncro. Kann zur Entlastung des Pendelstützenlagers im Betrieb beitragen. Passend für Getriebekennbuchstaben: EEZ, DQR, 02G-Syncro Vergleichsnummern: 7D0 399 207E, 7D0 323 609
Cable Clamp / Cable Clip 35 mm Non-original parts – suitable for VW T4
This product is a 35 mm cable clip Non-original parts – suitable for VW T4 . The cover is permanently connected to the clamp via an integrated hinge. This reduces the risk of the cover becoming detached when opened and supports stable positioning. • Standard snap-in mechanism for 6.5 mm mounting holes in the body or support structure • Suitable for material thicknesses up to a maximum of 3 mm
Cable Clamp / Cable Clip 50 mm Non-original parts – suitable for VW T4
This product is a 50 mm cable clip Non-original parts – suitable for VW T4 . The cover is permanently connected to the clamp via an integrated hinge. This reduces the risk of the cover becoming detached when opened and supports stable positioning. • Standard snap-in mechanism for 6.5 mm mounting holes in the body or support structure • Suitable for material thicknesses up to a maximum of 3 mm
Cover flap for bench seat not an original part – suitable for VW T4
This component is a cover flap for the Multivan bench seat, not an original part – suitable for VW T4. In most cases, the small retaining tabs break off and the flap no longer stays in place. With this replacement part, you will have a spare part again that can enhance your interior. Reference number: 7D0 868 231A
cover tailgate handle black Non-original parts – suitable for VW T4
This component is a flat trim panel for the interior tailgate release, Non-original parts – suitable for VW T4 Reference numbers (for comparison only): 705 829 313 701 827 557 A
cover tailgate handle grey Non-original parts – suitable for VW T4
This component is a flat trim panel for the interior tailgate release, Non-original parts – suitable for VW T4 Reference numbers (for comparison only): 705 829 313 701 827 557 A
dashboard cover wide from 1990 - 1995 Non-original parts – suitable for VW T4
This component is a wide dashboard trim panel, Non-original parts – suitable for VW T4 . Compatible with: VW T4, model years 1990–1995 Reference number (for comparison only): 701 857 234 A
Distance ring wiper arm - 3D printing Non-original parts – suitable for VW T4
This product is a spacer ring for the windshield wiper, Non-original parts – suitable for VW T4 Reference part number (for comparison only): 867 955 251
Double Clamp 23 mm and 7 mm v4 Non-original parts – suitable for VW T4
This product is a double clamp with 23 mm and 7 mm diameters, Non-original parts – suitable for VW T4 . The double clamp is rotatable through 360° and is used to secure a Bowden cable to a hose or to connect one hose to another. In practice, the double clamp is often used as a holder for the throttle Bowden cable and is mounted on the outlet hose of the coolant expansion tank. The rotatable design supports flexible alignment and tidy cable routing in the engine compartment.
Fastening Clip for Interior Trim Panel Version 1, Not an Original Part – Suitable for VW T4
Here you will receive a replacement clip for fastening your interior trim panels, not an original part – suitable for VW T4. This clip allows the interior trim panel to be securely fastened to the vehicle body again.Before the repair, the trim panel must be separated from the vehicle body. Installation is quick and straightforward.
Fastening Clip for Interior Trim Panel Version 2, Not an Original Part – Suitable for VW T4
Here you will receive a replacement clip for fastening your interior trim panels, not an original part – suitable for VW T4. This clip allows the interior trim panel to be securely fastened to the vehicle body again.Before the repair, the trim panel must be separated from the vehicle body. Installation is quick and straightforward.
Forkhead - Non-original parts – suitable for VW T4
This component is a clevis, Non-original parts – suitable for VW T4 The clevis is installed on the transmission and may be missing on replacement or exchange gearboxes. This component serves as a replacement part for repair and maintenance work. Reference number (for comparison only): 701 711 243
Gearbox Repair Kit Non-original parts – suitable for VW T4
This product is a repair kit for the manual transmission, Non-original parts – suitable for VW T4 . Problems when engaging gears can occur in older vehicles and may be attributable to worn or damaged components in the gear linkage area. This repair kit serves as a replacement solution to repair the relevant components. The kit is intended for use in repair and maintenance work. Installation is possible with basic mechanical skills. However, actual function and effectiveness may vary depending on the condition of the vehicle. If you have any questions about the product or its application, please feel free to contact us. Reference number: 701 798 169
Handbrake rod long wheelbase 3320mm Non-original parts – suitable for VW T4
This component consists of 2 handbrake rods with rear equalizer lever, Non-original parts – suitable for VW T4 . The set consists of pull rods and an equalizer lever and is intended for repair and maintenance work on the handbrake mechanism. Damaged or worn components of the handbrake can impair its function and are replaced as part of a repair using this set. Comparison numbers (for comparison only): 701 711 481, 721 711 475
Headlight washer system nozzle set Non-original parts – suitable for VW T4
This product consists of nozzles for the headlight washer system, Non-original parts – suitable for VW T4 . Over time, the nozzles may be lost or damaged. This set serves as a replacement solution to fully re-equip the headlight washer system. The nozzles are designed to match the intended installation positions and are intended for use in repair and maintenance work. Reference numbers (for comparison only): 701 955 101 (left) 701 955 102 (right) Design note: The nozzles are supplied without an overpressure valve. If the washer fluid reservoir is filled to the brim, washer fluid may escape through the nozzles in individual cases. An optional version with a retrofit overpressure valve is available, which can help reduce unintended water leakage. The valve is supplied with two hose connectors and is installed in the line behind the washer fluid reservoir. This can limit the outflow of washer fluid. The nozzles may extend slightly less, but the headlight cleaning function generally remains intact. If you have any questions about the product or its application, please feel free to contact us.
Headlight Washer System Valve Non-original parts – suitable for VW T4
This item is a valve for the headlight washer system, Non-original parts – suitable for VW T4 . The valve is installed between the washer fluid reservoir and the washer nozzles. It is used to regulate the pressure within the system and can help reduce unintentional leakage of washer fluid through the nozzles. The valve is suitable as a replacement if uneven pressure or leakage of washer fluid occurs in the existing system. If you have any questions about the product or require assistance with installation, please feel free to contact us.
Intake Pipe / Turbocharger Inlet 2.5 TDI Non-original parts – suitable for VW T4
This product is an intake pipe, Non-original parts – suitable for VW T4 . Over time, the old intake pipe may show material fatigue, particularly in the area of the turbocharger connection. This can lead to leaks, which may affect the airflow within the intake system. This intake pipe serves as a replacement part if the existing pipe is damaged or leaking. The component is manufactured to fit precisely and is intended for use in repair and maintenance work. Note: The O-ring for the turbocharger connection is included in the scope of delivery. Please check your vehicle’s reference number before ordering. Reference number: 074129715F If you have any questions about the product or its application, please feel free to contact us.
Intercooler & Air Filter Housing Bracket Non-original parts – suitable for VW T4
This product is a 4-piece holder set, Non-original parts – suitable for VW T4 . Over the years, original holders can become damaged or break due to aging or material fatigue. This set serves as a replacement solution to repair or replace the corresponding holders. The parts are manufactured to fit precisely and are intended for use in repair and maintenance work. Installation is possible with basic mechanical skills. Actual fit and function may vary depending on the condition of the vehicle. Reference number: 037133567F If you have any questions about the product or its application, please feel free to contact us.
Left GRP -Fender, 15"/16", -Non-original parts – suitable for VW T4
This product consists of fenders, not original parts – suitable for VW T4. These are available as 15-inch and 16-inch variants. The fenders are made of GRP (glass fiber reinforced plastic) and serve as a replacement or retrofit solution within the scope of bodywork. The components are delivered primed and are intended for further processing (painting). Manufacturing takes place in Germany by an experienced producer who has been producing products for road and motorsport use for many years. If you have any questions about the product or the available variants, please do not hesitate to contact us.
lifting roof - Westfalia scissors Stainless steel cross connector Non-original parts – suitable for VW T4
This component is a cross connector, Non-original parts – suitable for VW T4 . The cross connector repair kit is intended for vehicles compatible with the Westfalia pop-up roof and is used to repair the roof mechanism. Over time, components of the mechanism may deform, which can impair the closing of the pop-up roof. This replacement part is intended for repair and maintenance work and can help support the function of the mechanism. The part is made of 4 mm stainless steel.
Molded covers for side windows Carbon, not original parts – suitable for VW T4
Delivery time: The covers are individually manufactured after ordering and it takes approximately 4–5 weeks until delivery. This will be coordinated separately with the customer.Product description: The molded covers serve as a cover for the rear side windows. They are made of Visible carbon (painted) – carbon fiber (CFRP) Installation note: Attachment is carried out by bonding with suitable window adhesive to glass or sheet metal. The adhesive is not included in the scope of delivery. Installation must be carried out properly by qualified personnel to ensure safe and permanent attachment. Fitment: Suitable for vehicles with a short wheelbase of 2920 mm.
Molded covers for side windows GFRP, not original parts – suitable for VW T4
Product description: The molded covers serve as a cover for the rear side windows. They are made of GFRP glass fiber reinforced plastic (epoxy resin). Installation note: Attachment is carried out by bonding with suitable window adhesive to glass or sheet metal. The adhesive is not included in the scope of delivery. Installation must be carried out properly by qualified personnel to ensure safe and permanent attachment. Fitment: Suitable for vehicles with a short wheelbase of 2920 mm.