Repair Panels & Welding Panels – Precision Reproductions in Top Quality
VW is a protected trademark of Volkswagen AG. The mention serves exclusively to identify the vehicle allocation.
Discover our wide range of repair panels and welding panels compatible with T4, perfect for rust repair, restoration, or bodywork refurbishment of your T4.
All body panels are clearly organized by front and rear axle, making it easy to find the right part quickly.
Whether sills, wheel arches, fenders, or floor panels – our repair panels help you restore your van to top condition and eliminate rust permanently.
Installation note: Fitting should be carried out by qualified professionals (e.g., body shops or certified workshops). Consultation with an inspection authority (e.g., TÜV, DEKRA) is recommended.
1 pair of reinforcement plates rear shock absorbers version 1 (Aftermarket) compatible with VW T4
This component consists of reinforcement panels version 1, compatible with VW T4. The curved design is intended for use in the area of the shock absorber mount on the rear axle and serves as a repair panel. The reinforcement panels are provided with a thin zinc coating. After installation, it is recommended to additionally coat the reinforcement panels, for example with a suitable primer followed by stone chip protection. Notes on the variants: There are two different versions of the reinforcement panels available. Before ordering, please check whether the stiffening of version 2 corresponds to the version shown in the product image. Version 2 with round stiffening is also available in the shop.
1 pair of reinforcement plates rear shock absorbers version 2 curved (Aftermarket) - compatible with VW T4
This component consists of reinforcement panels version 2, compatible with VW T4. The curved design is intended for use in the area of the shock absorber mount on the rear axle and serves as a repair panel. The reinforcement panels are provided with a thin zinc coating. After installation, it is recommended to additionally coat the reinforcement panels, for example with a suitable primer followed by stone chip protection. Notes on the variants: There are two different versions of the reinforcement panels available. Before ordering, please check whether the stiffening of version 2 corresponds to the version shown in the product image. Version 1 with straight stiffening is also available in the shop.
air conditioning panel rear right V2 (Aftermarket)- compatible with VW T4
This component is an air conditioning panel version 2, compatible with VW T4. The component is intended for repair and maintenance work and has been adapted to the structural conditions. Details and features: • Material: galvanized steel sheet, 1 mm thick • Pressing reproduced to stabilize the pipe feed-through for air conditioning lines • Mounting: M6 thread, welded, with additional spacing for line eyelets • M5 thread on the opposite side, also welded • Edge formed to match the side inner wall according to the intended installation position Actual fit may vary depending on the condition of the vehicle.
bearing bracket for rear stabilizer bar as a reproduction set (Aftermarket) - compatible with VW T4
This component is a stabilizer bearing bracket, compatible with VW T4. The bearing bracket is installed on the rear axle (RA). It was used, among other applications, in later model variants as well as in Syncro vehicles. Reference number (for comparison only): 701 804 933 D
bumper bracket repair plate for rear axle left and right (Aftermarket) - compatible with VW T4
This component is a bumper bracket repair panel (set), compatible with VW T4. The bumper bracket serves as a replacement part to replace a damaged or corroded bracket. The repair panel is intended for installation under the rear bumper on the driver’s side. The component is pre-bent and made of 1 mm thick steel sheet. It is intended for vehicles from the model years 1997–2003 and is suitable for repair and maintenance work. Replacing the damaged component can help restore the original mounting of the bumper. Actual fit and effectiveness may vary depending on the condition of the vehicle.
bumper holder repair plate for rear axle left (Aftermarket) - compatible with VW T4
This component is a bumper bracket repair panel, compatible with VW T4. The bumper bracket serves as a replacement part to replace a damaged or corroded bracket. The repair panel is intended for installation under the rear bumper on the driver’s side. The component is pre-bent and made of 1 mm thick steel sheet. It is intended for vehicles from the model years 1997–2003 and is suitable for repair and maintenance work. Replacing the damaged component can help restore the original mounting of the bumper. Actual fit and effectiveness may vary depending on the condition of the vehicle.
bumper holder repair plate for rear axle right (Aftermarket) - compatible with VW T4
This component is a bumper bracket repair panel , compatible with VW T4. The bumper bracket serves as a replacement part to replace a damaged or corroded bracket. The repair panel is intended for installation under the rear bumper on the driver’s side. The component is pre-bent and made of 1 mm thick steel sheet. It is intended for vehicles from the model years 1997–2003 and is suitable for repair and maintenance work. Replacing the damaged component can help restore the original mounting of the bumper. Actual fit and effectiveness may vary depending on the condition of the vehicle.
climate plate rear left (Aftermarket) - compatible with VW T4
This component is an air conditioning panel, compatible with VW T4. The component is made of 1 mm thick steel sheet and is intended for vehicles from the model years 1991 to 2003. It is located behind the luggage compartment trim on the left-hand side. The design of the air conditioning panel includes tabs that allow installation without disconnecting the air conditioning lines. Replacement is carried out as part of repair and maintenance work; fastening can be done by tack welding. Reference number (for comparison only): 7D1 801 569 A
climate plate rear right (Aftermarket) - compatible with VW T4
This component is an air conditioning panel, compatible with VW T4. The component is made of 1 mm thick steel sheet and is intended for vehicles from the model years 1991 to 2003. It is located behind the luggage compartment trim on the right-hand side. The design of the air conditioning panel includes tabs that allow installation without disconnecting the air conditioning lines. Replacement is carried out as part of repair and maintenance work; fastening can be done by tack welding. Reference number (for comparison only): 7D1 801 570 A
cross member over spare wheel (Aftermarket)- compatible with VW T4
This component is a cross member above the spare wheel, compatible with VW T4. The component is made of automotive steel with a material thickness of 1.5 mm. The cross member is located centrally above the spare wheel. In this area, corrosion damage can occur over time, which is why the cross member is often replaced as part of repair and maintenance work. Comparison number (for comparison only): 7D1 803 533 B
Doka shock absorber unit (Aftermarket) - compatible with VW T4
This component is a shock absorber bracket for double cab and flatbed, compatible with VW T4. The bracket is made of 3 mm thick steel. The area of the shock absorber mounting is reinforced by an additionally welded 3 mm steel insert, resulting in a material thickness of 6 mm at the main load-bearing point. On the opposite side, an M12 thread is provided to accommodate the shock absorber bolt. The component is designed for use in repair and maintenance work. If you require further information or have any questions about our product, please feel free to contact us.
forced ventilation, rear bumper mount, left side (Aftermarket) - compatible with VW T4
This component is the forced ventilation panel, compatible with VW T4. The component is made of 1.5 mm galvanized steel sheet and is designed in the form of a repair panel. Relevant cut-outs and mounting holes for the bumper attachment are provided. The forced ventilation panel is intended for use in repair and maintenance work. Available for: left and right side Material: 1.5 mm galvanized steel sheet Comparison number (for comparison only): 701 809 171 D
forced ventilation, rear bumper mount, right side (Aftermarket)- compatible with VW T4
This component is the forced ventilation panel, compatible with VW T4. The component is made of 1.5 mm galvanized steel sheet and is designed in the form of a repair panel. Relevant cut-outs and mounting holes for the bumper attachment are provided. The forced ventilation panel is intended for use in repair and maintenance work. Available for: left and right side Material: 1.5 mm galvanized steel sheet Comparison number (for comparison only): 701 809 171 D
locking plate for cross beams (Aftermarket)- compatible with VW T4
This component is a closing panel for the cross member, compatible with VW T4. The closing panel is intended for repair and maintenance work and includes the required cut-outs for welding operations. Note: The repair panel is shipped as bulky goods. Reference number (for comparison only): 701 804 775
lower spring plate for the rear wishbone (Aftermarket)- compatible with VW T4 and VW T4 Syncro
This product is a lower spring seat on the steering knuckle, compatible with VW T4. The spring seat is used to hold the spring in the rear control arm. Over time, the original spring seat may be affected by corrosion or mechanical wear. This component is intended as a replacement part for repair and maintenance work. The spring seat consists of two welded components. The base plate is 3 mm thick, and the core guiding the spring is of solid design. Additional outer cut-outs support alignment and installation. The spring seat is provided with holes for spot welds to facilitate replacement. Technical details: • Plate thickness: 3 mm
panel for the left side with sliding door (Aftermarket) - compatible with VW T4
This repair panel is a left sliding door repair panel, compatible with VW T4. The component is used on vehicles with a left sliding door and is intended for repair and restoration work when the existing panel is damaged. The repair panel serves as a replacement part to restore the affected area.
rear axle mount for steering knuckles (Aftermarket)- compatible with for VW T4
This component is a rear axle mount, compatible with VW T4. Over time, corrosion damage may occur in the area of the rear axle mount. This component is intended as a replacement part for repair and maintenance work. The rear axle mount is made of 4 mm thick steel and features additional reinforcement.
rear cross member in front of the spare wheel (Aftermarket) - compatible with VW T4
This component is a cross member behind the spare wheel, compatible with VW T4. The cross member is located in the direction of travel in front of the spare wheel and serves to support the spare wheel carrier. The cross member is made of 2 mm thick steel sheet and is intended for repair and maintenance work. The mounting tabs are designed without pre-drilled holes, allowing new welding points to be set. Comparison part number (for comparison only): 701 803 537 A
shock absorber mount as a set (Aftermarket) - compatible with VW T4
This component is a shock absorber bracket for double cab and flatbed, compatible with VW T4. The bracket is made of 3 mm thick steel. The area of the shock absorber mounting is reinforced by an additionally welded 3 mm steel insert, resulting in a material thickness of 6 mm at the main load-bearing point. On the opposite side, an M12 thread is provided to accommodate the shock absorber bolt. The component is designed for use in repair and maintenance work. If you require further information or have any questions about our product, please feel free to contact us.
side member rear axle left - version 1 straight (Aftermarket) - compatible with VW T4
This component is the longitudinal member compatible with VW T4. The longitudinal member for the rear section of the vehicle is made of 3 mm thick steel sheet. It covers the rear area from the C-pillar to the D-pillar. Holes, cut-outs, and angles are designed according to the intended installation position and are intended for repair and maintenance work. Comparison numbers (for comparison only): 7D0 804 465 / 7D0 804 466
side member rear axle right - version 1 (Aftermarket )- compatible with VW T4
This component is the longitudinal member compatible with VW T4. The longitudinal member for the rear section of the vehicle is made of 3 mm thick steel sheet. It covers the rear area from the C-pillar to the D-pillar. Holes, cut-outs, and angles are designed according to the intended installation position and are intended for repair and maintenance work. Comparison numbers (for comparison only): 7D0 804 465 / 7D0 804 466
spring holder spring plate left (Aftermarket)- compatible with VW T4
This component is a spring mount , compatible with VW T4. The repair panel for the spring mount is made of 2 × 3 mm steel sheet and is intended for repair and maintenance work. The complete spring mount including the spring seat consists of a 3 mm thick bent component with a welded 3 mm base plate as well as a round component for holding the bump stop. The bump stop is included in the scope of delivery. Before ordering, please check whether the vehicle is equipped with the spring mount with two angled sides, as highlighted in blue in the last product image. Reference numbers (for comparison only): 701 803 455 C / 701 803 456 B
spring holder spring plate right (Aftermarket)- compatible with VW T4
This component is a spring mount , compatible with VW T4. The repair panel for the spring mount is made of 2 × 3 mm steel sheet and is intended for repair and maintenance work. The complete spring mount including the spring seat consists of a 3 mm thick bent component with a welded 3 mm base plate as well as a round component for holding the bump stop. The bump stop is included in the scope of delivery. Before ordering, please check whether the vehicle is equipped with the spring mount with two angled sides, as highlighted in blue in the last product image. Reference numbers (for comparison only): 701 803 455 C / 701 803 456 B
spring retainer spring plate left and right, incl. rubber buffer (Aftermarket) - compatible with VW T4
This component is a spring mounting set left / right, compatible with VW T4. The repair panel for the spring mount is made of 2 × 3 mm steel sheet and is intended for repair and maintenance work. The complete spring mount including the spring seat consists of a 3 mm thick bent component with a welded 3 mm base plate as well as a round component for holding the bump stop. The bump stop is included in the scope of delivery. Before ordering, please check whether the vehicle is equipped with the spring mount with two angled sides, as highlighted in blue in the last product image. Reference numbers (for comparison only): 701 803 455 C / 701 803 456 B