Repair Panels & Welding Panels – Precision Reproductions in Top Quality
VW is a protected trademark of Volkswagen AG. The mention serves exclusively to identify the vehicle allocation.
Discover our wide range of repair panels and welding panels compatible with T4, perfect for rust repair, restoration, or bodywork refurbishment of your T4.
All body panels are clearly organized by front and rear axle, making it easy to find the right part quickly.
Whether sills, wheel arches, fenders, or floor panels – our repair panels help you restore your van to top condition and eliminate rust permanently.
Installation note: Fitting should be carried out by qualified professionals (e.g., body shops or certified workshops). Consultation with an inspection authority (e.g., TÜV, DEKRA) is recommended.
1 pair of reinforcement plates rear shock absorbers version 1 (Aftermarket) compatible with VW T4
This component consists of reinforcement panels version 1, compatible with VW T4. The curved design is intended for use in the area of the shock absorber mount on the rear axle and serves as a repair panel. The reinforcement panels are provided with a thin zinc coating. After installation, it is recommended to additionally coat the reinforcement panels, for example with a suitable primer followed by stone chip protection. Notes on the variants: There are two different versions of the reinforcement panels available. Before ordering, please check whether the stiffening of version 2 corresponds to the version shown in the product image. Version 2 with round stiffening is also available in the shop.
1 pair of reinforcement plates rear shock absorbers version 2 curved (Aftermarket) - compatible with VW T4
This component consists of reinforcement panels version 2, compatible with VW T4. The curved design is intended for use in the area of the shock absorber mount on the rear axle and serves as a repair panel. The reinforcement panels are provided with a thin zinc coating. After installation, it is recommended to additionally coat the reinforcement panels, for example with a suitable primer followed by stone chip protection. Notes on the variants: There are two different versions of the reinforcement panels available. Before ordering, please check whether the stiffening of version 2 corresponds to the version shown in the product image. Version 1 with straight stiffening is also available in the shop.
air conditioning panel rear right V2 (Aftermarket)- compatible with VW T4
This component is an air conditioning panel version 2, compatible with VW T4. The component is intended for repair and maintenance work and has been adapted to the structural conditions. Details and features: • Material: galvanized steel sheet, 1 mm thick • Pressing reproduced to stabilize the pipe feed-through for air conditioning lines • Mounting: M6 thread, welded, with additional spacing for line eyelets • M5 thread on the opposite side, also welded • Edge formed to match the side inner wall according to the intended installation position Actual fit may vary depending on the condition of the vehicle.
bearing bracket for rear stabilizer bar as a reproduction set (Aftermarket) - compatible with VW T4
This component is a stabilizer bearing bracket, compatible with VW T4. The bearing bracket is installed on the rear axle (RA). It was used, among other applications, in later model variants as well as in Syncro vehicles. Reference number (for comparison only): 701 804 933 D
Bracket for stabilizer rear (Aftermarket) - compatible with VW T4
This component is a stabilizer bearing bracket, compatible with VW T4. The bearing bracket is installed on the rear axle (RA). It was used, among other applications, in later model variants as well as in Syncro vehicles. Reference number (for comparison only): 701 804 933 D
bumper bracket repair plate for rear axle left and right (Aftermarket) - compatible with VW T4
This component is a bumper bracket repair panel (set), compatible with VW T4. The bumper bracket serves as a replacement part to replace a damaged or corroded bracket. The repair panel is intended for installation under the rear bumper on the driver’s side. The component is pre-bent and made of 1 mm thick steel sheet. It is intended for vehicles from the model years 1997–2003 and is suitable for repair and maintenance work. Replacing the damaged component can help restore the original mounting of the bumper. Actual fit and effectiveness may vary depending on the condition of the vehicle.
bumper holder repair plate for rear axle left (Aftermarket) - compatible with VW T4
This component is a bumper bracket repair panel, compatible with VW T4. The bumper bracket serves as a replacement part to replace a damaged or corroded bracket. The repair panel is intended for installation under the rear bumper on the driver’s side. The component is pre-bent and made of 1 mm thick steel sheet. It is intended for vehicles from the model years 1997–2003 and is suitable for repair and maintenance work. Replacing the damaged component can help restore the original mounting of the bumper. Actual fit and effectiveness may vary depending on the condition of the vehicle.
bumper holder repair plate for rear axle right (Aftermarket) - compatible with VW T4
This component is a bumper bracket repair panel , compatible with VW T4. The bumper bracket serves as a replacement part to replace a damaged or corroded bracket. The repair panel is intended for installation under the rear bumper on the driver’s side. The component is pre-bent and made of 1 mm thick steel sheet. It is intended for vehicles from the model years 1997–2003 and is suitable for repair and maintenance work. Replacing the damaged component can help restore the original mounting of the bumper. Actual fit and effectiveness may vary depending on the condition of the vehicle.
climate plate rear left (Aftermarket) - compatible with VW T4
This component is an air conditioning panel, compatible with VW T4. The component is made of 1 mm thick steel sheet and is intended for vehicles from the model years 1991 to 2003. It is located behind the luggage compartment trim on the left-hand side. The design of the air conditioning panel includes tabs that allow installation without disconnecting the air conditioning lines. Replacement is carried out as part of repair and maintenance work; fastening can be done by tack welding. Reference number (for comparison only): 7D1 801 569 A
climate plate rear right (Aftermarket) - compatible with VW T4
This component is an air conditioning panel, compatible with VW T4. The component is made of 1 mm thick steel sheet and is intended for vehicles from the model years 1991 to 2003. It is located behind the luggage compartment trim on the right-hand side. The design of the air conditioning panel includes tabs that allow installation without disconnecting the air conditioning lines. Replacement is carried out as part of repair and maintenance work; fastening can be done by tack welding. Reference number (for comparison only): 7D1 801 570 A
cross member over spare wheel (Aftermarket)- compatible with VW T4
This component is a cross member above the spare wheel, compatible with VW T4. The component is made of automotive steel with a material thickness of 1.5 mm. The cross member is located centrally above the spare wheel. In this area, corrosion damage can occur over time, which is why the cross member is often replaced as part of repair and maintenance work. Comparison number (for comparison only): 7D1 803 533 B
Doka shock absorber unit (Aftermarket) - compatible with VW T4
This component is a shock absorber bracket for double cab and flatbed, compatible with VW T4. The bracket is made of 3 mm thick steel. The area of the shock absorber mounting is reinforced by an additionally welded 3 mm steel insert, resulting in a material thickness of 6 mm at the main load-bearing point. On the opposite side, an M12 thread is provided to accommodate the shock absorber bolt. The component is designed for use in repair and maintenance work. If you require further information or have any questions about our product, please feel free to contact us.
forced ventilation, rear bumper mount, left side (Aftermarket) - compatible with VW T4
This component is the forced ventilation panel, compatible with VW T4. The component is made of 1.5 mm galvanized steel sheet and is designed in the form of a repair panel. Relevant cut-outs and mounting holes for the bumper attachment are provided. The forced ventilation panel is intended for use in repair and maintenance work. Available for: left and right side Material: 1.5 mm galvanized steel sheet Comparison number (for comparison only): 701 809 171 D
forced ventilation, rear bumper mount, right side (Aftermarket)- compatible with VW T4
This component is the forced ventilation panel, compatible with VW T4. The component is made of 1.5 mm galvanized steel sheet and is designed in the form of a repair panel. Relevant cut-outs and mounting holes for the bumper attachment are provided. The forced ventilation panel is intended for use in repair and maintenance work. Available for: left and right side Material: 1.5 mm galvanized steel sheet Comparison number (for comparison only): 701 809 171 D
front wheel arch liner (Aftermarket) - compatible with VW T4
This component is a diesel filter panel / repair panel for the front wheel housing liner, compatible with VW T4. The repair panel is made of 1.5 mm thick steel sheet and is intended for repair and maintenance work in the area of the front wheel housing liner. It is primarily used in the area of the diesel filter on the driver’s side (correspondingly on the passenger side in the area of the washer fluid reservoir). The repair panel is designed to cover the damaged area and extends with tabs into the inner wheel arch. Advantages: • Material thickness: 1.5 mm steel sheet • Suitable as a replacement for damaged wheel housing liners Comparison number (for comparison only): 7D0 801 244 B
front wheel arch liner repair plate (Aftermarket) - compatible with VW T4
This component is a diesel filter panel / repair panel for the front wheel housing liner, compatible with VW T4. The repair panel is made of 1.5 mm thick steel sheet and is intended for repair and maintenance work in the area of the front wheel housing liner. It is primarily used in the area of the diesel filter on the driver’s side (correspondingly on the passenger side in the area of the washer fluid reservoir). The repair panel is designed to cover the damaged area and extends with tabs into the inner wheel arch. Advantages: • Material thickness: 1.5 mm steel sheet • Suitable as a replacement for damaged wheel housing liners Comparison number (for comparison only): 7D0 801 244 B
fuel nozzle inner skirt (Aftermarket) - compatible with VW T4
This component is a fuel filler neck panel, compatible with VW T4. The component is made of 1 mm body steel sheet and consists of two welded parts. The design is intended for repair and maintenance work and allows the removal of the damaged area to create a suitable surface for welding. A hole for cavity wax treatment is provided.
interior jib for jacks on the left (Aftermarket) - compatible with VW T4
This product is an inner sill support, compatible with VW T4. The jack points are welded to the inner sill supports, which also form the basic structure for the floor in the front passenger compartment. In addition, the step panel is attached to each of the inner sill supports. As part of repair and maintenance work, it may be advisable to replace these panels together with the jack points, as subsequent replacement can be difficult. Part number (for comparison only): 701 803 151
interior jib for jacks on the right (Aftermarket) - compatible with VW T4
This product is an inner sill support, compatible with VW T4. The jack points are welded to the inner sill supports, which also form the basic structure for the floor in the front passenger compartment. In addition, the step panel is attached to each of the inner sill supports. As part of repair and maintenance work, it may be advisable to replace these panels together with the jack points, as subsequent replacement can be difficult. Part number (for comparison only): 701 803 151
jack mount left compatible (Aftermarket) - compatible with VW T4
This component is a jack point , compatible with VW T4. The jack points are intended for repair and maintenance work. Replacing both sides can be advisable, as comparable damage often occurs on the opposite side as well. The jack point is manufactured from a single piece and is made of 2 mm thick body steel sheet. The interior area is reinforced. The right-hand jack point includes the drilled holes and threads for the catalytic converter bracket. The set is intended for vehicles from model years 1990 to 2003. Reference numbers (for comparison only): 7D0 802 132 / 701 803 151
jack mount right (Aftermarket)- compatible with VW T4
This component is a jack point , compatible with VW T4. The jack points are intended for repair and maintenance work. Replacing both sides can be advisable, as comparable damage often occurs on the opposite side as well. For vehicles from model years before 1997, minor adjustments may be required on the right-hand side. The jack point is manufactured from a single piece and is made of 2 mm thick body steel sheet. The interior area is reinforced. The right-hand jack point includes the drilled holes and threads for the catalytic converter bracket. The set is intended for vehicles from model years 1997 to 2003. Reference numbers (for comparison only): 7D0 802 132 / 701 803 151
jack mount right and left as a set (Aftermarket) - compatible with VW T4
This component is a jack point set left / right, compatible with VW T4. The jack points are intended for repair and maintenance work. Replacing both sides can be advisable, as comparable damage often occurs on the opposite side as well. For vehicles from model years before 1996, minor adjustments may be required on the right-hand side. The jack point is manufactured from a single piece and is made of 2 mm thick body steel sheet. The interior area is reinforced. The right-hand jack point includes the drilled holes and threads for the catalytic converter bracket. The set is intended for vehicles from model years 1990 to 2003. Reference numbers (for comparison only): 7D0 802 132 / 701 803 151
locking plate for cross beams (Aftermarket)- compatible with VW T4
This component is a closing panel for the cross member, compatible with VW T4. The closing panel is intended for repair and maintenance work and includes the required cut-outs for welding operations. Note: The repair panel is shipped as bulky goods. Reference number (for comparison only): 701 804 775
locking plate wheel house front axle (Aftermarket) - compatible with VW T4
This component is a closing panel, compatible with VW T4. The component is made of 1 mm thick steel sheet and is intended for vehicles from the model years 1991–2003. It is installed in the wheel housing box on the left or right side. The closing panel separates the wheel arch liner from the step panel in the interior and features two pre-formed edges to allow adjustment during installation.After installation, it is recommended to completely seal the closing panel with a 2K primer. Afterwards, suitable stone chip protection should be applied.Reference number (for comparison only): 701801268A