spare parts

It is a holder for the ABS cable Non-original parts – suitable for VW T4 . If the holder is damaged or missing, the routing of the ABS cable may be impaired. This component serves as a replacement part for repair and maintenance work and is intended for vehicles compatible with VW T4.

This component is an acoustic capsule, Non-original parts – suitable for VW T4 . The design is intended for use in the area of the gear linkage. The capsule forms a stable outer shell. The interior can optionally be lined with suitable sound insulation materials to further support noise reduction (insulation material not included). The additional cover can help reduce the transmission of noise from the area of the engine tunnel. It may also help reduce heat transfer into the interior. Scope of delivery: • 1 × foam rubber strip, approx. 650 mm, for sealing the contact surfaces Reference part number (for comparison only): 7D0 711 545 / 7D0711545

This product is a 35 mm cable clip Non-original parts – suitable for VW T4 . The cover is permanently connected to the clamp via an integrated hinge. This reduces the risk of the cover becoming detached when opened and supports stable positioning. • Standard snap-in mechanism for 6.5 mm mounting holes in the body or support structure • Suitable for material thicknesses up to a maximum of 3 mm

This product is a 50 mm cable clip Non-original parts – suitable for VW T4 . The cover is permanently connected to the clamp via an integrated hinge. This reduces the risk of the cover becoming detached when opened and supports stable positioning. • Standard snap-in mechanism for 6.5 mm mounting holes in the body or support structure • Suitable for material thicknesses up to a maximum of 3 mm

This component is a cover flap for the Multivan bench seat, not an original part – suitable for VW T4. In most cases, the small retaining tabs break off and the flap no longer stays in place. With this replacement part, you will have a spare part again that can enhance your interior. Reference number: 7D0 868 231A

This component is a flat trim panel for the interior tailgate release, Non-original parts – suitable for VW T4 Reference numbers (for comparison only): 705 829 313 701 827 557 A

This component is a flat trim panel for the interior tailgate release, Non-original parts – suitable for VW T4 Reference numbers (for comparison only): 705 829 313 701 827 557 A

This component is a wide dashboard trim panel, Non-original parts – suitable for VW T4 . Compatible with: VW T4, model years 1990–1995 Reference number (for comparison only): 701 857 234 A

This product is a spacer ring for the windshield wiper, Non-original parts – suitable for VW T4 Reference part number (for comparison only): 867 955 251

This product is a double clamp with 23 mm and 7 mm diameters, Non-original parts – suitable for VW T4 . The double clamp is rotatable through 360° and is used to secure a Bowden cable to a hose or to connect one hose to another. In practice, the double clamp is often used as a holder for the throttle Bowden cable and is mounted on the outlet hose of the coolant expansion tank. The rotatable design supports flexible alignment and tidy cable routing in the engine compartment.

This component is a clevis, Non-original parts – suitable for VW T4 The clevis is installed on the transmission and may be missing on replacement or exchange gearboxes. This component serves as a replacement part for repair and maintenance work. Reference number (for comparison only): 701 711 243

This product is a repair kit for the manual transmission, Non-original parts – suitable for VW T4 . Problems when engaging gears can occur in older vehicles and may be attributable to worn or damaged components in the gear linkage area. This repair kit serves as a replacement solution to repair the relevant components. The kit is intended for use in repair and maintenance work. Installation is possible with basic mechanical skills. However, actual function and effectiveness may vary depending on the condition of the vehicle. If you have any questions about the product or its application, please feel free to contact us. Reference number: 701 798 169

This component consists of 2 handbrake rods with rear equalizer lever, Non-original parts – suitable for VW T4 . The set consists of pull rods and an equalizer lever and is intended for repair and maintenance work on the handbrake mechanism. Damaged or worn components of the handbrake can impair its function and are replaced as part of a repair using this set. Comparison numbers (for comparison only): 701 711 481, 721 711 475

This product consists of nozzles for the headlight washer system, Non-original parts – suitable for VW T4 . Over time, the nozzles may be lost or damaged. This set serves as a replacement solution to fully re-equip the headlight washer system. The nozzles are designed to match the intended installation positions and are intended for use in repair and maintenance work. Reference numbers (for comparison only): 701 955 101 (left) 701 955 102 (right) Design note: The nozzles are supplied without an overpressure valve. If the washer fluid reservoir is filled to the brim, washer fluid may escape through the nozzles in individual cases. An optional version with a retrofit overpressure valve is available, which can help reduce unintended water leakage. The valve is supplied with two hose connectors and is installed in the line behind the washer fluid reservoir. This can limit the outflow of washer fluid. The nozzles may extend slightly less, but the headlight cleaning function generally remains intact. If you have any questions about the product or its application, please feel free to contact us.

This item is a valve for the headlight washer system, Non-original parts – suitable for VW T4 . The valve is installed between the washer fluid reservoir and the washer nozzles. It is used to regulate the pressure within the system and can help reduce unintentional leakage of washer fluid through the nozzles. The valve is suitable as a replacement if uneven pressure or leakage of washer fluid occurs in the existing system. If you have any questions about the product or require assistance with installation, please feel free to contact us.

This product is an intake pipe, Non-original parts – suitable for VW T4 . Over time, the old intake pipe may show material fatigue, particularly in the area of the turbocharger connection. This can lead to leaks, which may affect the airflow within the intake system. This intake pipe serves as a replacement part if the existing pipe is damaged or leaking. The component is manufactured to fit precisely and is intended for use in repair and maintenance work. Note: The O-ring for the turbocharger connection is included in the scope of delivery. Please check your vehicle’s reference number before ordering. Reference number: 074129715F If you have any questions about the product or its application, please feel free to contact us.

This product is a 4-piece holder set, Non-original parts – suitable for VW T4 . Over the years, original holders can become damaged or break due to aging or material fatigue. This set serves as a replacement solution to repair or replace the corresponding holders. The parts are manufactured to fit precisely and are intended for use in repair and maintenance work. Installation is possible with basic mechanical skills. Actual fit and function may vary depending on the condition of the vehicle. Reference number: 037133567F If you have any questions about the product or its application, please feel free to contact us.

This product is a nozzle for the headlight cleaning system, not an original part – suitable for VW T4. The nozzles can be lost or damaged over time. This component serves as a replacement solution to fully equip the headlight cleaning system again. The nozzles are structurally adapted to the intended installation positions and are designed for use as part of repair and maintenance work. Reference numbers (for comparison only): 701 955 101 (left) The nozzles are supplied without pressure relief valve. If the windshield washer reservoir is filled to the top, in some cases washer fluid may leak from the nozzles. Optionally, a version with a retrofit pressure relief valve is available, which can help reduce unintended leakage of water. The valve is supplied with two hose barbs and is installed into the line behind the washer fluid reservoir. This can limit the outflow of washer fluid. The nozzles may extend slightly less, but the headlight cleaning function generally remains intact. If you have any questions about the product or its application, please feel free to contact us.ac

This component is a cross connector, Non-original parts – suitable for VW T4 . The cross connector repair kit is intended for vehicles compatible with the Westfalia pop-up roof and is used to repair the roof mechanism. Over time, components of the mechanism may deform, which can impair the closing of the pop-up roof. This replacement part is intended for repair and maintenance work and can help support the function of the mechanism. The part is made of 4 mm stainless steel and is intended for use under normal environmental conditions.

This product is a clip for the throttle or clutch Bowden cable, Non-original parts – suitable for VW T4 . The clip is used for orderly routing of the Bowden cable on the plastic partition in the engine compartment. If the clip is damaged or missing, the routing of the Bowden cable may be impaired. In addition, the clip is also suitable for securing cables or vacuum hoses and supports tidy line routing in the engine compartment.

This component is a retaining clip Non-original parts – suitable for VW T4 . This clip is used to secure the window regulator guide rail at the door opening. If it is damaged or missing, the window glass may run at an angle or the function of the window regulator mechanism may be impaired. If the window regulator rattles or the glass no longer runs smoothly, this can be due among other things to a small but important component: the upper retaining clip of the guide rail.

Over time, the mounting plate on which the clutch master cylinder is installed may develop cracks. This can be caused by the continuous forces acting when the clutch pedal is operated. This repair panel serves as a replacement solution for repair and maintenance work and can help reduce the likelihood of renewed damage in this area. The actual effect may vary depending on the condition of the vehicle and the installation situation.

This component is a repair kit for the balance bar, Non-original parts – suitable for VW T4 . This kit serves as a replacement if components of the balance bar are damaged or worn. The repair kit consists of coordinated components and is intended for use in repair and maintenance work. This set is compatible with the spring holder replacement part, compatible with VW T4.

This component is a retaining plate for the mushroom-head bolt of the seat mounting, Non-original parts – suitable for VW T4 . Reference number (for comparison only): 703 883 281B